Nginx Admin version 1.5 released.

The Nginx Admin WHM plugin v1.5 is released.

Change Log:
1- Better interfacing with cPanel 11.28.
2- New clean interface.

Please do the following to install!

Install instruction:
cd /usr/local/src
wget http://nginxcp.com/nginxadmin1.5-stable.tar
tar xf nginxadmin1.5-stable.tar
cd publicnginx
./nginxinstaller install

Note:If you have previously installed the any version of the nginx, please uninstall and then perform the installation.

Uninstall instruction is given below,

cd /usr/local/src
wget http://nginxcp.com/nginxadmin1.5-stable.tar
tar xf nginxadmin1.5-stable.tar
cd publicnginx
./nginxinstaller uninstall

46 comments

  • Keep up the great work… You are now featured on my WHMSecurity blog..

  • Well I’m getting a issue here -.-

    Please upgrade cPanel to version 11.25 or above

    Why do I get this issue ?

    I never had it.

    My Cpanel version is : 11.26

  • i got the following error upon restarting nginx after installation:

    Restarting nginx daemon:
    [emerg]: bind() to 217.23.1.213:80 failed (99: Cannot assign requested address)
    already running.

  • we have just recently changed our main IP address, how can we change it manually on nginx as nginx will not work and gives us the following error:

    bind() to 217.23.1.50 failed (99: Cannot assign requested address)

    and our new main ip address is now 217.23.1.51

  • Any way to have this script upgrade itself instead of keep re-installing it every time an update occurs please ?

  • When install NginxAdmin 1.5 issue with multiple ip address

    I use 2 Ip Address Zone 1 and Zone 2

    Appox 50% Webstie Zone 1 and 50% of Website on Zone 2

    It’s very slower compare with Default Apache 2.2 from cPanel

  • Steve

    I’m seeing this error after install:

    Restarting nginx daemon: nginx[emerg]: bind() to 173.203.114.190:80 failed (99: Cannot assign requested address) already running.

    But that IP address is nto on my server! It’s a softlayer IP address, and my server is nowhere near softlayer!

    • admin

      Its look like one of your site dns is pointing to this IP. (maybe some site redirecting via A record)
      Check your dns zones. And also search this IP in your httpd.conf

  • mike

    after install nginx admin everything look fine

    but apache status from WHM does not work

    Failed to receive status information from Apache.
    Unable to connect to local httpd server.

  • omar

    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [warn] 1374#0: conflicting server name “75.126.244.72” on 75.126.244.72:80, ignored
    2010/11/11 12:15:55 [notice] 1374#0: using the “epoll” event method
    2010/11/11 12:15:55 [notice] 1374#0: nginx/0.8.53
    2010/11/11 12:15:55 [notice] 1374#0: built by gcc 4.1.2 20080704 (Red Hat 4.1.2-48)
    2010/11/11 12:15:55 [notice] 1374#0: OS: Linux 2.6.18-194.17.4.el5
    2010/11/11 12:15:55 [notice] 1374#0: getrlimit(RLIMIT_NOFILE): 65535:65535
    2010/11/11 12:15:55 [notice] 1375#0: start worker processes
    2010/11/11 12:15:55 [notice] 1375#0: start worker process 1376

  • The_Cow

    Upon installing this, it seems logs have stopped working now and all domlogs in /usr/local/apache/domlogs/ are 0kb in size (last modified around the time of installation).

    Please can you advise?

    Cheers.

  • mike

    I have new error when i restart apache

    “www.mydomain.com” on 00.00.00.00:80, ignored
    00.00.00.00 it’s my IP

    what does that mean and how can i fix it ?

  • No, I do get the same error whenever I restart apache..
    “[emerg]: bind() to xxx.xxx.xxx.xxx:80 failed (98: Address already in use)”.

    I tried reinstalling but nothing changed, same error without playing with httpd.conf or anything else but restarting.

  • There is a problem with the configations files the installer has generated on my system. I can’t restart or reload the service without errors plus I get dozens of cpanel notifications flooding my email. I had to uninstall.

  • Hello admin and thx for th great nginx plugin

    i’ve tried to install but it doesnot look normal
    here is what appeared
    i am using WHM/Cpanel 11.28

    root@server [/usr/local/src/publicnginx]# ./nginxinstaller install
    /usr/local/src/publicnginx
    Welcome to the Nginx Admin installer……Starting Install
    Generating vhosts…
    Installing WHM interface…
    deploying booster rockets
    gettin there
    update apache logsconfigure
    Hangup
    root@server [/usr/local/src/publicnginx]#

    and itried to uninstall
    root@server [/usr/local/src/publicnginx]# ./nginxinstaller uninstall
    Hangup
    root@server [/usr/local/src/publicnginx]#

    could you help me

    thank you

  • admin

    This error is because the rebuild apache config is still in progress. just wait 30-60 seconds and restart nginx again.

  • To solve the binding problem with cpanel 11.28.35 (at least) you should:
    – Go to Main >> Server Configuration >> Tweak Settings
    – Change “Apache non-SSL IP/port ” to 0.0.0.0:8081 instead of 0.0.0.0:80
    – Restart Apache and nginx

  • ad

    hello
    Uber Uploader is activated using the nginx server, but I receive error””Flength Error, estimated that if the software running cgi-bin perl to extra running, but running a perl cgi and nginx. Is it due to a problem I wonder?

  • i have some site that has dedicated IP will nginx will automatically configure itself on with their respective dedicated IP or needs to be modified manually?

  • Hello! I installed your nginx plugin, but I have multiple IP, but found that part of the IP is not available, I checked the ip monitor I’ve seen it, but can not be used.

  • Hi,
    i am trying to install on my vps ,buts comes with the error.

    root@vps15801 [/usr/local/src/publicnginx]# ./nginxinstaller install
    access key doesn’t exist create it in WHM

    please advice

    thanks

  • Nginx

    hello

    After a while installing nginx with user name and password on all sites entered in the 500 internal server error warning the encounter, we took the hard restart, but after looking up the problem this entry begins again, what can we do for it ?

    • First uninstall Nginx Admin,
      Go to Main >> Server Configuration >> Tweak Settings
      under System tab change Apache non-SSL IP/port to 8081 and then install again

  • Drops

    After setting up nginx, nginx i want to start the nginx does not start and I get an error like below, I did compile apache, nginx setup again but did not improve.

    Error code

    [emerg]: invalid server name or wildcard “www.*.xxxxx.com” on 18x.xxx.xxx.xx:80
    already running.

  • I try to install hangup problem.same problem at uninstall pls give one way.

    • admin

      – Uninstall Nginx Admin
      – Go to Main >> Server Configuration >> Tweak Settings
      – Change “Apache non-SSL IP/port ” to 0.0.0.0:8081 instead of 0.0.0.0:80
      – Restart Apache – Reinstall Nginx Admin Again.

  • hello i am getting same error as bahaa

    /usr/local/src/publicnginx
    Welcome to the Nginx Admin installer……Starting Install
    Generating vhosts…
    Installing WHM interface…
    deploying booster rockets
    gettin there
    update apache logsconfigure
    Hangup
    root@IS-13266 [/usr/local/src/publicnginx]# cd ~
    root@IS-13266 [~]#

    any fix?

    • admin

      – Uninstall Nginx Admin
      – Go to Main >> Server Configuration >> Tweak Settings
      – Change “Apache non-SSL IP/port ” to 0.0.0.0:8081 instead of 0.0.0.0:80
      – Restart Apache
      – Reinstall Nginx Admin Again.

  • FIX FOR THE ALL THE BUGS

    1.access key doesn’t exist create it in WHM
    SOLUTION :go to WHM > Cluster/Remote Access > Setup Remote Access Key and click on the “Generate New Key” button.
    2.Welcome to the Nginx Admin installer……Starting Install
    Generating vhosts…
    Installing WHM interface…
    deploying booster rockets
    gettin there
    update apache logsconfigure
    Hangup

    SOLUTION: Go to Main >> Server Configuration >> Tweak Settings
    under System tab change Apache non-SSL IP/port to 8081 and then install again

  • Hello,

    I have problem when try to disable symlink, anyone can tell me how to disable symlink for nginx ? I need do this for security reason as we use nginx on share hosting server. Thanks

  • Sergio

    Hello

    I installed nginx correctly after following some instructions here but i noticed that when i restart nginx, i see lots of errors like this:

    nginx: [warn] conflicting server name “xx.xx.xx.211” on xx.xx.xx.211:80, ignored
    nginx: [warn] conflicting server name “xx.xx.xx.212” on xx.xx.xx.212:80, ignored

    This are all addon IPs i have mapped for particular domains. How can i fix this?

    Also i have some errors like this:

    nginx: [warn] conflicting server name “www.domain.com” on xx.xx.xx.210:80, ignored

    or

    nginx: [warn] conflicting server name “*.domain.com” on xx.xx.xx.210:80, ignored

    I’ve read the commentaries but didnt found any solution yet.

    Thank you

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.